Bellylabs Dog Pregnancy Test

Contents of Kit:

• • User instructions
  • 2 safety lancet devices
  • Swab for sample collection
  • Buffer tube for sample processing
  • Foil-wrapped test cassette
  • Packaging with a built-in holder for the buffer tube

1. Unpack all the test-kit parts and place them on a flat surface. Keep a timer nearby. Press the buffer tube into its spot on the packaging and open the top lid.
2. Push down the safety tab to activate the lancet.
3. Hold your dog firmly, lift the upper lip, and press the lancet device against the inner lip horizontally. Press the release button. If needed, use the spare lancet.
4. Once a full droplet of blood is visible, use the sample swab until it is fully red and no longer absorbs blood.
5. Place the sample swab into the buffer liquid, set a timer for 1 minute, and roll the swab in the liquid for 3-5 rounds.
6. Break off the swab against the tube's side at the pre-cut break point and close the top lid carefully.
7. After 1 minute, turn the buffer tube upside down and open the smaller lid.
8. Turn the buffer tube upright, hold it vertically, and drop 2 drops of the sample into the test cassette's sample hole.
9. Leave the test undisturbed on a flat surface and set your timer for 10 minutes.
10. Check the test result 10-15 minutes after applying the sample.

______________________________________________________________________________

How To Read Results:

• After completing the Bellylabs Dog Pregnancy Test, read the results within 10-15 minutes. A positive outcome is indicated by both the Test (T) and Control (C) lines appearing. A negative result will only display the Control (C) line. If the Test (T) line alone is visible or no lines appear, the test is invalid and should be repeated. Be aware that the strength of the lines does not influence accuracy, and results after 15 minutes may not be dependable.

______________________________________________________________________________

Interpretation of Results:

• The Bellylabs Dog Pregnancy Test indicates pregnancy with a positive result, and it's best to follow up with a veterinarian. A negative result might suggest that your dog isn't pregnant, is experiencing pseudopregnancy, or that the test was done prematurely. Retest after one week if needed, and ensure the test is performed no earlier than 28 days post-ovulation. False positives can arise due to procedural errors, ongoing relaxin hormone, or specific medical conditions, so careful interpretation is key.

______________________________________________________________________________

After a positive result, it's recommended to consult a veterinarian. They can track the pregnancy and determine the number and condition of the fetuses using ultrasound or x-ray

______________________________________________________________________________

Storage:

• • Store at 36-86 F. Do not use if any packaging is damaged or compromised.